Daily Archives: July 6, 2010

Granular HDPE Extruder V3 – Success.

After my previous failings at using using solder to cap an extruder barrels open end I have now turned to brazing. The solder method may have worked but it turns out I don’t have any high temperature solder and it was just … Continue reading

Posted in DIY Granular extruding | Tagged , , , , , , | 12 Comments

Granular extruder, good news and bad.

I did some testing this afternoon on the granular extruder I recently put together. Things didnt go so well.. It turns out that the ‘high temperature’ solder I used to seal the end wasn’t up to the task. I first tried to … Continue reading

Posted in DIY Granular extruding | Tagged , , , | 2 Comments